Table of Contents
Advertisement
USER
Optional SRC1 Basic Remote Control
1
8
7
6
6
1
POWER KEY – Turns the keypad on and off. Press and hold for All On or All
Off function.
2
NUMERIC KEYS – For direct selection of channels or tracks.
2
3
VOLUME UP/DOWN KEY – Raises and lowers the amp/receiver volume.
4
COMMAND KEYS – Control the source equipment.
5
DIRECT SOURCE SELECT KEYS – Directly select sources 1– 6 controlled by
the keypad.
3
6
F1 AND F2 KEYS – Set and select Favorite 1 and Favorite 2 presets.
7
CURSOR KEYS – Issue navigation commands for source equipment, allowing
movement through menus and program screens.
8
INPUT KEY – Scrolls through sources controlled by the keypad. Works the
same as the keypad's Source key.
4
The optional SRC1 Basic System Remote Control will operate the K2 keypad
and sources 1–6 through the keypad. The SRC1 has no built-in programming
capability and therefore cannot operate source components directly.
5
Advertisement
Table of Contents
