Verizon Ellipsis Jetpack Manual

Meet your Jetpack.
About your Jetpack
Charging port
NOTE: Appearance of device may vary.
Power Button
Operations
Turn on
Turn o
Display
wake-up
Info display
Light
O
Red
Green
Power Indicator
Light
O
Blue
SIM card slot/
Power button/
Power reset
Menu button
Display
Actions
Press and hold the Power button for 2 seconds to turn on.
Press and hold the Power button for 3 seconds to turn o .
When the display is o (sleep mode), the first quick press
of the Power button wakes up the display.
When the display is on, each time the Power button is
pressed quickly, selected information displays.
Charging status
The Jetpack is not connected to a charger.
The Jetpack is connected to a charger and is currently
charging.
The Jetpack is connected to a charger and the battery
is fully charged.
Power status
The Jetpack is o .
The Jetpack is on.
NOTE: Non-Removable Battery. Your Jetpack
is equipped with an internal rechargeable
battery. You should never attempt to open or
disassemble this Jetpack. Doing so may cause
Power indicator
damage that voids your warranty.
WARNING! Please use only an approved charger
to charge your Jetpack. Improper handling
of the charging port, as well as the use of an
incompatible charger, may cause damage to
your device and void the warranty.
Franklin Wireless
Ellipsis Jetpack
Power reset
Display
Display indicators
Shows network signal
strength
Appears when data is being
transferred between the
mobile network and your
Jetpack.
Appears when Jetpack is
roaming
Shows the number of
connected devices. When the
Jetpack can't support any
more devices, MAX is shown.
Appears when you have
unread text messages.
Shows the battery charge
status
Appears when battery is
charging.
Appears when your Jetpack
SIM is PIN locked.
Appears when there's an error
?
with the SIM card.
Appears when there's no SIM
X
card in your Jetpack.