ASROCK ULTRA QUAD M.2 Installation Manual

*15G062067000AK*
P/N: 15G062067000AK V1.0
ASRock ULTRA QUAD M.2 card

Package Contents

• ASRock ULTRA QUAD M.2 card
• Quick Installation Guide
• Support CD
• M.2 screws

Specifications

Dimensions • 9.6-in x 4.4-in
Interface • PCI Express 3.0 x 16 interface
• 4 x Ultra M.2 Sockets, support M Key type
2242/2260/2280/22110 M.2 PCI Express
Connector
module up to Gen3 x4 (32 Gb/s)
• 1 x Graphics 12V Power Connector
Installation Procedure
1. Remove the five screws holding the bracket in place.
2. Peel off the protective film(s) on the bracket's thermal pad(s) before you
install M.2 SSD module(s).
3. Fasten the five screws holding the bracket in place.
Power off the PC and unplug the power cord. Detach all other cables from
the PC.
4. Remove the PC cover.
5. Align and insert the card into a PCI Express 3.0 x16 slot on the motherboard.
Press firmly until the card is securely seated in place.
6. (This step is only for motherboards with an Intel® X299 chipset.)
Locate the VROC1 header on your motherboard, then install a VROC
key module to enable the Intel® Virtual RAID on CPU feature.
*Please refer to the user manual that comes with your motherboard for the
accurate location of the Virtual RAID On CPU Header (VROC1).
Card Layout
2
1
No. Description
1 Ultra M.2 Sockets
2 PCI Express 3.0 x 16 Interface
3 ASRock Utility Control Switch
4 Card Fan Switch
5 Graphics 12V Power Connector
5
4
O N
4
3
2
1
3