Toro 23522 Operator's Manual page 2

This product complies with all relevant European directives;
for details, please see the separate product specific Declaration
of Conformity (DOC) sheet.
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals
known to the State of California to cause cancer,
birth defects, or reproductive harm.
This spark ignition system complies with Canadian ICES-002
Because in some areas there are local, state, or federal
regulations requiring that a spark arrester be used on the
engine of this machine, a spark arrester is available as
an option. If you require a spark arrester, contact your
Authorized Toro Service Dealer.
Genuine Toro spark arresters are approved by the USDA
Forestry Service.
It is a violation of California Public Resource Code
Section 4442 or 4443 to use or operate the engine on any
forest-covered, brush-covered, or grass-covered land unless
the engine is equipped with a spark arrester, as defined in
Section 4442, maintained in effective working order or the
engine is constructed, equipped, and maintained for the
prevention of fire.
Introduction
This machine is designed to level brush, tall weeds, saplings,
small trees and heavy vegetation up to 1.8 m (6 feet) tall and
5.1 cm (2 inches) in diameter.
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
You may contact Toro directly at www.Toro.com for product
and accessory information, help finding a dealer, or to register
your product.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers of
your product ready. Figure 1
model and serial numbers on the product. Write the numbers
in the space provided.
© 2016—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
illustrates the location of the
1. Model and serial number plate
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety-alert symbol
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
1. Safety-alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical information
and Note emphasizes general information worthy of special
attention.
2
Figure 1
(Figure
Figure 2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
g186622
2),
g000502