Connecting The Plasma Display - Runco CinemaWall CW-43MC Owner's Operating Manual

CONNECTING THE PLASMA DISPLAY

Modular Controller Card - Input Connections
Plasma Rear View
Component S-Video Composite
DVI
Push Button
INPUT 5
DVI SOURCE INPUT (WITH HDCP DECRYPTION): (Digital 480P, 720P, 1080i): Input for set top box or PC with
DVI digital output.
INPUT 4
COMPONENT INPUT: Component video is the best type of signal that can be used. The most common sources
that use component outputs are DVD players, and it is highly recommended that component be used when
possible. Component video goes one step beyond S-Video in picture quality; chroma (color) information is more resolved
and the overall picture appears more well-defined.
INPUT 3
S-VIDEO INPUT: S-Video is the second-best type of signal that can be used, but is MUCH better than Composite
video. Using such sources as Satellite receivers, high-quality VCRs and DVD players (with no component
output) will produce a MUCH cleaner and sharper signal than composite.
S-VIDEO/COMPOSITE SELECTION PUSH BUTTON: This push button toggles between S-Video and Composite
Video when using Input 3. Both S-Video and Composite Video cannot be active simultaneously.
COMPOSITE VIDEO INPUT: Composite video is the most common type of signal used, but is also the lowest in picture
quality. Many sources have outputs that are limited to composite video, such as some VCR's and camcorders; others such
as Laser Disc players actually produce slightly better results when using composite video.
10