Using The Chassis Id Prom Tool - Fujitsu PRIMERGY CX2560 M4 Upgrade And Maintenance Manual

Ê Under Select Host Adapter use the arrow keys æ/Ë to select the desired
FC/FCoE adapter and press [Enter].
Ê From the Fast!UTIL Options menu, select Configuration Settings, and press
[Enter].
Ê From the Configuration Settings menu, select Adapter Settings, and press
[Enter].
Ê Note down the new 16-digit WWN address found under Adapter Port Name.
Ê Press [Esc] to return to the main menu and exit the QLogic BIOS utility.
Ê Inform the customer about the changed WWN address.

5.2.16 Using the Chassis ID Prom Tool

I
Regarding the CX2550 M4/CX2560 M4/CX2570 M4, this action is not
required if the system information restore is successfully done. For more
information, see section
on page 83.
System information like server name and model, housing type, serial number
and manufacturing data are stored in the system board.
In order to integrate your system into the ServerView management environment
and to enable server installation using the ServerView Installation Manager,
system data needs to be complete and correct.
The tool and further instructions are available to maintenance personnel from
the Fujitsu Technology Solutions Extranet:
https://partners.ts.fujitsu.com/com/service/ps/Servers/PRIMERGY/
Ê Select your PRIMERGY system from the main area of the page.
Ê From the categories selection, choose Software & Tools Documentation.
Ê In the Tools area click Tools: Chassis-IDProm Tool to download the file
(tool-chassis-Idprom-Tool.zip).
I
For Japan, follow the instructions provided separately.
CX2550/60/70 M4
"Verifying system information backup / restore"
Upgrade and Maintenance Manual
Basic software procedures
99