6.4.3.3
Concluding steps
Perform the following procedures:
"Installing the riser module" on page 55
Ê
"Installing the memory slot air duct (Air cooling only)" on page 64
Ê
"Installing the server node in the server enclosure" on page 67
Ê
Ê Reconnect all external cables.
"Controls and indicators on the server node" on page 448
Ê
"Updating expansion card firmware" on page 83
Ê
CX2550/60/70 M4
Expansion cards and OCP mezzanine cards
Upgrade and Maintenance Manual
(if applicable)
151