Important Safety Measures; Temperature Control Probe - Maxim Kitchenpro MFP1215B User Manual

3) Do not use a nylon, metal brush or steel wool on the frypans surface as it will
damage the non-stick surface. Clean the frypan with a soft cloth only.
4) Do not leave plastic cooking utensils in contact with the hot frypan surface while cooking

IMPORTANT SAFETY MEASURES


The cable should not be twisted or kinked

Never pull on the cable, always pull from the plug at the socket

After cleaning the appliance, it must be completely dry before it can be used

TEMPERATURE CONTROL PROBE


You must be careful with the temperature control probe as it is sensitive to knocks and
falls.

Always use the temperature control probe that comes with your appliance. Do not use
another control probe.

If the temperature control probe appears damaged, stop using it immediately.

If the supply cord is damaged, it must be replaced by a special cord or assembly
available from the manufacturer or its service agent.
CLEANING
WARNING: Ensure you have unplugged the appliance and allowed it to
completely cool before undertaking any cleaning.
DO NOT USE STEEL WOOL SCOURING PADS, ABRASIVE CLEANERS, OR SCRAPE THE
HOT PLATE WITH METAL UNTENSILS. ALL OF THESE METHODS MAY DAMAGE THE NON
STICK SURFACE.
DO NOT USE AN ABRASIVE CLEANER AS IT MAY DAMAGE THE EXTERIOR FINISH.
Part Name
Non-stick surface
Frypan outer
Temperature control probe
Method
Clean the hotplate after use with a soft wet cloth. Ensure the hot plate is
completely cool. If the residue is difficult to clean, put a little water in the
frypan and turn it on. The hot plate will be heated and the residue should
be easily cleaned.
Clean the outside of the frypan with warm soapy water and a soft cloth.
Do not use a thinner, benzene, or any other harsh chemicals which may
damage the surface.
Clean with a soft cloth or paper towel. Never immerse the temperature
control probed, plug or cord in water or any other liquid.
WARNING: Never immerse the temperature control probe, plug and cord
in water or any other liquid.
NOTE: Store the Temperature Control probe carefully. Take care not to
knock of drop the probe as this can cause damage. If damage is
suspected, return the Temperature Control Probe with the frypan to the