Table of Contents
Advertisement
12�3�2 Inserting your mobile device in the VRU1
1. Gently open the device clip and pull the device holder to remove
the protective front cover.
Note:
For 5 inch mobile devices, before inserting the mobile device, you are
required to install the rubber frame first.
2. Pull the device holder to fit your mobile device size and insert your
mobile device into the VRU1 from the right to the left, making sure
that your mobile device is powered on and the screen is not locked.
3. Push down on the device holder until the mobile device locks in
the right place.
99
Caution:
• If the mobile device is not securely locked, the mobile device may
accidentally separate from the VRU1 and get damaged.
• Keep the lenses clean and unscratched.
12�3�3 Wearing the VRU1
1. Align your face and the foam cushion and put on the VRU1.
Note:
Do not walk or drive while wearing the VRU1. Always be aware of your
surroundings while using the VRU1 to avoid injury.
2. Secure the VRU1 to your head using the straps and place it
comfortably over your face.
3. Adjust the length of the top head strap and the main strap.
Note:
If you wear the VRU1 tilted to one side, it may bring discomfort. When
the screen is tilted, adjust the VRU1 until the screen becomes clear.
100
Advertisement
Table of Contents
