Install A Pcie Adapter - Lenovo ThinkAgile VX3720 7Y12 User Manual

Figure 37. Adapter removal
Attention: Make sure no components contacts the cassette sheet metal edges when
removing the adapter from the cassette.
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.

Install a PCIe adapter

Use this information to install a PCIe adapter.
"Read the
installation
Guidelines" on
page 47
Before you install a PCIe adapter:
1. Touch the static-protective package that contains the adapter to any unpainted metal surface on the
solution; then, remove the adapter from the package.
2. Place the adapter, component side up, on a flat, static-protective surface and set any jumpers or
switches as described by the adapter manufacturer, if necessary.
Complete the following steps to install the PCIe adapter.
Step 1. Remove the adapter cassette.
a. Slide the release latch to the open position.
b. Slide the adapter cassette out of the shuttle.
70
ThinkAgile VX Enclosure ThinkAgile VX3720 User's Guide
"Power off
the compute
node
for this task"
on page 32
"ATTENTION:
Static Sensitive Device
Ground package before opening"
on page 49