Cable Wrap; Cable Flag - Brother P-touch PT-E105 User Manual

3
LABEL APPLICATION KEYS

Cable Wrap

Use this function to create a label
that can be wrapped around a
cable or wire.
Turn on the Cable Rotate/Repeat function to print
text repeatedly along the length of the label so
that it can easily be read from any angle.
• To activate the Text Repeat function, press
and then select [CableRot/Rpt].
[Txt Rpt: Off]
/
(Enter text)
• Cable diameter: 0.2" to 3.6" (3mm to 90mm)
NOTE
• We recommend using Brother Flexible ID Tape for labels attached to cables and wires.
• To cancel the Cable Wrap/Cable Flag/Faceplate functions during operation, press
accordingly.
• Depending on the format you select, the entire contents of your text may not be printed. For example, if the
text is too long to fit into the format, the [Text Limit!] error message will appear.
[Txt Rpt: On]
(Select a cable diameter)
Default: 0.3" (6mm)

Cable Flag

Use this function to create a
label that can be wrapped
around a cable or wire with its
ends applied together to form a
flag.
Specify the length you want, or select [Auto] to
automatically adjust the flag length according to
the text length.
/
(Enter text)
• Flag length: 0.4" to 8.0" (10mm to 200mm), Auto
Default: Auto
• Use the Cable Flag function when the diameter
of the object is more than 0.2" (3mm).
• Text cannot be rotated when using the Cable
Flag function.
(Select a flag length)
/ or