Setting Timer; Regulating Air Flow Direction - Royal Sovereign ARP-900DE Owner's Manual

Setting timer

1. Press the TIMER button to set the operating hours desired (1 to 12 hours, the timer indicator will light on).
When the set time has been reached, the machine will turn off
you press the TIMER button. If the timer button is not pressed, the unit will work continuously.
2. By pressing the timer but without turning on the other functions, you can PRESET the time for the machine to start.
For example, if you press the timer to '2', the unit will start automatically after 2 hours.
All the above functions can also be performed with the supplied remote control.
The remote control requires 2 AAA batteries to operate.

Regulating air flow direction

Turn the roller on the air vent to control the air flow direction of the vertical louvers.
Move the air vent directly to adjust the air flow direction of the horizontal louvers.
NOTE: 1. To lenghten the compressor's life, after turning off the unit, please wait at
least 3 minutes before turning it back on.
2. The cooling system will switch off if the ambient temperature is lower than the set one. The ventilation, however, keeps working
at the set level. If the ambient temperature rises above the selected level, the cooling function will resume.
3. On the contrary, the heat will switch off if the ambient temperature is HIGHER than the set one (still, the ventilation keeps
working at the set level). As the ambient temperature drops below the selected level, the heating function will resume.
4. This machine is equipped with ANTI-FROST function. While using the heating function in low temperatures, sometimes the heat
will stop for a while in order to melt the frost. As this occurs, just wait for the heating function to resume.
automatically. The display window will show the hour(s) you set as
FIG.20
Sales Inquiries: (800) 934-9194
10
FIG.19
FIG.21
http://www.sylvane.com/rs-arp-900e.html