Change Password - Verbatim Store ‘n’ Go Secure Portable HDD / SSD User Manual

Chapter 3: Change Password
1. Press and hold
the red LED and
2. Enter the existing password (Default password: "00000") and press
The orange LED
3. Type your new password and confirm by pressing key
4. Retype your password set in step 3 and press
5. Your device is now unlocked again.
then connect the USB Cable with the drive and your computer until
orange LED light up. You now can release the
will turn off.
button.
.
again until the red LED
EN
to confirm.
turns off.
8