Specifications; Fm Tuner; Am Tuner - Rotel RX-975 Owner's Manual

Specifications

All specifications are accurate at the time of
printing.
Rotel reserves the right to make improvements
without notice.
Rotel and the Rotel HiFi logo are registered
trademarks of The Rotel Co, Ltd., Tokyo, Japan.
15
Audio
Continuous Amplifier Power:
Total Harmonic Distortion:
Intermodulation Distortion (60 Hz: 7 kHz):
Frequency Response:
Signal to Noise Ratio (IHF "A" weighted):
Input Overload:
Preamplifier Output Voltage:
Input Sensitivity/Impedance:
Tone Controls (Bass/Treble):
Video
Frequency Response:
Signal to Noise Ratio:
Input Impedance:
Output Impedance:
Output Level:

FM Tuner

Usable Sensitivity:
50dB Quieting Sensitivity:
Signal to Noise Ratio (at 65 dBf):
Harmonic Distortion (at 65 dBf):
Frequency Response:
Capture Ratio:
Alternate Channel Selectivity:
Spurious Response Ratio:
Image Response Ratio:
IF Response Ratio:
AM Suppression Ratio:
Stereo Separation (100Hz/1 kHz/10 kHz):
Output level:
Antenna Input:

AM Tuner

Sensitivity:
Selectivity:
Image Response Ratio:
Signal to Noise Ratio:
Output level:
Antenna Input:
General
Power Consumption:
Power Requirements (AC):
Weight:
Dimensions (W x H x D):
English
100 watts/channel
(20–20k Hz, <0.05% THD, 8 ohms)
<0.05% at rated power
<0.05% at rated power
Line Level: 10 Hz - 70 kHz, ±3 dB
Phono: 20 Hz - 20 kHz, ±1.5 dB
92 dB
Line Inputs: 5 V
Phono Inputs: > 120 mV
1.1 V
Line Level: 200 mV/47 kohms
Phono: 3.1 mV/47 kohms
±8 dB at 100 Hz/10 kHz
3 Hz-10 MHz, ± 3 dB
45 dB
75 ohms
75 ohms
1 volt
14.2 dBf
20.2 dBf (mono)
45.3 dBf (stereo)
70 dBf (mono)
65 dBf (stereo)
0.3% (mono)
0.5% (stereo)
30 Hz-14 kHz, ± 1.5 dB
2.0 dB
47 dB (± 400 kHz)
80 dB
65 dB
80 dB
52 dB
40 dB/45 dB/35 dB
550 mV
75 ohms unbalanced
500 µV/m
25 dB
35 dB
40 dB
160 mV
Loop Antenna
350 watts
120 volts, 60 Hz (USA version)
230 volts, 50 Hz (European version)
11.5 Kg/25.4 lb.
450 x 158 x 400 mm
17 " x 6 " x 15 "
3/4 1/4 3/4