Ac Power Connections; Ac Input; Remote External Sensor - Rotel RX-975 Owner's Manual

RX-975 AM/FM Stereo Receiver
14

AC Power Connections

AC Input

Your RX-975 is configured at the factory for
the proper AC line voltage in the country
where you purchased it (120 volts AC, 60Hz
in the US or 230 volts AC, 50Hz in the
European community). The AC line configu-
ration is noted on a decal on the back of
your unit.
Plug the supplied cord into the AC INPUT
receptacle on the back of the unit.
AC Convenience Outlet
[USA version only]
Two AC outlets let you plug a power cord
from a source component or other accessory
into the back of the RX-975 so that it will
be turned on and off automatically. The outlet
is powered whenever the RX-975 is fully
active and off when it is in STANDBY mode.

Remote External Sensor

This 3.5 mm mini-jack receives command
codes from industry-standard infrared receiv-
ers (Xantech, etc.) via hard-wired connec-
tions. This feature could prove useful when
the unit is installed in a cabinet and the front-
panel sensor is blocked. Consult your au-
thorized Rotel dealer for information on these
external repeaters and the proper wiring of
a jack to fit the mini-jack receptacle.