Connecting The Cables - HP E243M User Manual

Connecting the cables

NOTE: The monitor ships with select cables. Not all cables shown in this section are included with the
monitor.
1. Place the monitor in a convenient, well-ventilated location near the computer.
2. Before connecting the cables, route the cables through the cable routing hole in the center of the stand.
3. Connect a video cable.
NOTE:
be selected by pressing the
Input Control.
Connect one end of a VGA cable to the VGA connector on the rear of the monitor and the other end
●
to the VGA connector on the source device.
The monitor will automatically determine which inputs have valid video signals. The inputs can
Menu button to access the on-screen display (OSD) menu and selecting
Setting up the monitor 7