Items To Be Shown On The Display - BAFANG MM G31.250 User Manual

 Intelligent battery level indication: with an optimization algorithm, a stable display of the
battery level is ensured, and the problem of fluctuant battery level indication common with an
average display is avoided.
 Automatic light-sensitive headlight/taillight: as the outside light changes, the headlight and
taillight will be automatically turned on/ off.
 Backlight brightness: there are 5 levels of brightness for the display backlight, of which Level
1 indicates the darkest backlight while Level 5 indicates the brightest backlight.
 Mode indication: it displays the current assist mode (Mode 1 to Mode 5);
 Trip distance indication: there are two distance modes, single-trip distance TRIP and
accumulated distance, TOTAL. The displayable max distance is 99999.
 Fualt code prompt.
 Walk assistance.
 Parameter settings: various parameters, including mode, wheel diameter, speed limit, etc. can
be set on the computer via a communication cable. See the parameter setting instruction
document for details.
 Maintenance warning (this function is inactive by default): there prompts, on the display,
maintenance warning information based on battery charge/discharge cycles and riding
distance. The display automatically estimates the battery life, and gives battery maintenance
warnings when the number of charge/discharge cycles exceeds the set value. When the
accumulated riding distance exceeds the set value, the display will also prompt bicycle
maintenance necessity.

Items to be Shown on the Display

Battery level Battery
level
Distance
Distance mode
mode
headlight
Walk assist
Walk assistance

: average speed (AVG km/h), maximum speed (MAXS km/h)
Speed mode

: display of the speed, km/h or mile/h
Speed display

: 10-segment battery indication; the voltage that each segment represents can be
Battery level
39
Maintenance warning
Menu
Speed display
Speed mode
Fault prompt
Riding distance display
Assist mode