Factory Reset - B&K p/n 12698 Owner's Manual

Control Out 2, 3, and 4 - Control out 2, 3, and 4 can be used in either zone. For each source they can be
programmed to be on when that source is selected in zone 1, zone 2, or both zones. If the source is selected in
neither zone the control out will be off. Control outs 2, 3, and 4 can also be set to REMOTE. In REMOTE mode
your A/V System Controller acts like a remote repeater - IR remote signals detected by your A/V System Controller
are repeated on the control out. REMOTE mode is a global override for all sources.
From Remote
­ V
1
(PAUSE) or (STOP)
2 desired source
3 AUDIO
ˆ ‡
4
(REW) or (FF)
5 repeat 2 - 4
6 repeat 1 - 5
7 MENU
8 MENU
9 MENU
10 MENU

FACTORY RESET

Should you ever need to completely reset the A/V System Controller to the original factory settings from the front
panel press the SLEEP, DOWN, and LEVEL buttons simultaneously. The A/V System Controller will perform a
complete reset and erase all user programmed presets and menus.
CONTROL OUT SETUP for DVD
1 Control Out 1
2 Control Out 2
3 Control Out 3
4 Control Out 4
Using AV system controller
select a source to setup
AUD to select control
move to new line
adjust parameter
M E N U previous page
From Front Panel
(UP) or (DOWN)
(SOURCE) step to source
VOLUME KNOB
repeat 2 - 4
repeat 1 - 5
MENU
MENU
MENU
MENU
45
Phones
Zone 2
Z1+Z2
Remote
Action
move to Control Out 2
select source for Control Out setup
return control to A/V System Controller
set desired control out
set control out 2 for other sources
set control out 3 and 4
return to ADVANCED SYSTEM SETUP
return to SETUP MENUS
return to MAIN MENU
return to normal operation
p/n 12698 Rev. 9808B