Exiting The Calibration Routine; Deleting Calibration Points - Hach POCKET COLORIMETER II Instruction Manual

User-Entered Calibration,
10. When all calibration data has been reviewed or edited, "ADD" will appear in
the display.
11. Press
READ/ENTER
return to the measurement mode.
When a factory calibration curve has been edited, the "calibration adjust" icon will
Note:
appear in the display.

Exiting the Calibration Routine

Exit the calibration routine by pressing the
mode. The instrument uses the last completed user-entered calibration or the
factory calibration if no user-entered calibration has been completed.

Deleting Calibration Points

1. Select the range containing user-entered calibration points. See
Ranges on page
2. Press and hold the
.
READ/ENTER
Calibration points can also be deleted in Edit mode.
Note:
continued
to add more calibration points, or press
2—4.
key until "USER", then "CAL" appears. Press
MENU
key to return to measurement
MENU
2—24
twice to
MENU
Switching