iLive IPC284S User Manual

Quickstart Guide
Introduction- Power & Input Modes
Using the ITB382 Sound Bar
Status
Power Off
Optical Mode
Aux In Mode
Line In Mode
Radio Mode
Bluetooth Ready
Bluetooth Connected
iLive | ITB382
ITB382B-573-02-QS.indd 1
Connectivity-
Connecting your sound bar wirelessly using Bluetooth
1. Power on the unit by pressing the Power button.
Indicator
2. Press the Source button repeatedly to enter Bluetooth mode, indicated by a blue light.
No Light
3. Press the Pairing button on the side of the unit. The Pairing Indicator will flash blue quickly.
Amber Light
When pairing, remain within 3 feet of the unit.
White light
4. Using the native controls on your Bluetooth device, select the "ITB382" in your Bluetooth settings
White Light
to pair.
Green Light
If your device requests a password, enter the default password " 0 0 0 0 ".
Flashing Blue Light
Refer to the user's manual for your specific device for instructions on pairing and connecting Bluetooth
devices.
Blue Light
5.
will display a solid blue light.
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a
reset of the device.
If your device should become unpaired or you find it is unable to connect, repeat the above steps.
Bluetooth
When successfully paired and connected, a beep will issue from the unit and the Pairing Indicator
For FAQ, visit the support section at www.ilive.net or call customer support at: 1-888-999-4215
3/20/2013 3:13:45 PM