Sanyo FW40D48F Owner's Manual page 14

PC connection
HDMI connection
This unit can be connected to your PC that has an HDMI terminal.
Use an HDMI cable for this digital connection.
HDMI cable
IN
HDMI-DVI connection
This unit can be connected to your PC that has a DVI terminal.
Use an HDMI-DVI conversion cable for this video digital connection
and it requires stereo mini 3.5mm plug audio cable for analog audio
signal as well.
IN
conversion cable
IN
The following PC-input video signals can be displayed:
Format Resolution
VGA 640 x 480
SVGA 800 x 600
XGA 1,024 x 768
1,280 x 768
WXGA
1,360 x 768
FHD 1,920 x 1,080
Other formats or non-standard signals will not be displayed correctly.
Note(s)
Please purchase a HDMI-DVI conversion cable that has a ferrite core.
●
The following operations may reduce noise.
●
Attach a ferrite core to the AC power cord of your PC.
–
Unplug the AC power cord and use the built-in battery of your portable / laptop
–
PC.
Use an HDMI cable with the HDMI logo (a certified HDMI cable). High speed
●
HDMI cable is recommended for the better compatibility.
The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.
●
HDMI-DVI connection requires separate audio connections as well and the
●
audio signals are output as analog (L/R) audio.
DVI does not display 480i image which is not in compliance with EIA/
●
CEA-861/861B.
OUT
PC
Stereo mini
3.5 mm plug
audio cable
OUT
HDMI-DVI
OUT PC
Refresh rate
60Hz
USB memory stick
This unit offers easy playback of picture (JPEG) and video (Motion
JPEG) files.
Insert the USB memory stick into the USB terminal shown below.
USB L p. 31
Note(s)
The unit recognizes only a USB memory stick.
●
Do not use a USB hub or an extension cable to connect an external hard disk
●
drive to the unit. (Not supported.)
Always insert a USB memory stick directly to this unit.
●
A USB memory stick is not included with this unit.
●
We do not guarantee that all USB memory sticks can be supported by this unit.
●
Be sure to keep a backup copy of the original files on your USB device before
●
you play them back on this unit. We have no responsibilities for damage or loss
of your USB stored data.
To protect your USB memory stick files from being erased place the write
●
protect sliding tab in the protect position (if available).
When you are ready to remove a USB memory stick, set the unit to go into
●
standby mode to avoid any damage to your data and the unit.
A USB memory stick that requires its own driver or the device with a special
●
system such as fingerprint recognition are not supported.
This unit is not allowed to use the USB memory stick which requires an external
●
power supply (500mA or more).
14 .
English
Continued on next page.