24
ERROR MODE POWER FAIL RECOVERY DEFAULT DRYER SETTINGS
ERROR MODE
■ Meaning of Error Codes that LED displays during occurrence or problem.
Dryer error code
PROBLEM
POWER FAIL RECOVERY
In case of power failure the machine stops running but the time display remains on, showing the time just before
power failure.
Press the START button after the power is restored, then the machine will restart.
DEFAULT DRYER SETTINGS
Cycle Time (Minutes)
Cool Down Time Cycle
High Temperature
Medium Temperature
Low Temperature
Top Off Time (Minutes per coin)
Minutes/Minutes and seconds
Fahrenheit/Celsius
Error Mode
POSSIBLE CAUSE
It is displayed when thermistor is opened or shorted
It is displayed when thermistor temperature have increased
about 17 degrees for 10 seconds
Disconnection of card reader wire.
Default Settings
Thermistor should be replaced.
Thermistor should be replaced.
Check the card reader wire.
Default
50 Minutes
2 Minutes
154.4° F (68° C)
140° F (60° C)
125.6° F (52.5° C)
10 Minutes
Minutes
Fahrenheit
On
SOLUTION