20
PROGRAMMING MODE - Test Mode
2. Factory reset - EEPt
After a factory reset, all values are reset to the default values.
Entering set up
mode.
You will see LqC1
Press the PERM. PRESS or the DELICATES
Button until
Press the START button.
Press the PERM. PRESS button until
display.
Press the START button, then factory reset is done.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• OPL - Push "WHITES&COLORS" + "DELICATES" and the '3' .
Button
appears in the display.
is displayed.
appears in the
Display