Battery - Toshiba RAV-RM301KRTP-E Installation Manual

Installation diagram of Indoor and outdoor units
Batteries
Before installing the wireless remote controller
1. Remove the battery cover.
2. Insert 2 new batteries (R03 [AAA] type) following
the (+) and (−) positions.
Wireless remote controller
Cover
Batteries
13-EN
Refrigerant piping
must be protected from
physical damage.
Install a plastic cover
or equivalent.
Wireless
remote controller
Flat head
wood screw
Hook
Installation
plate
Shield pipe
Remote control holder
‒ 13 ‒
Installation Manual
For the rear left and left piping
Wall
Insert the cushion between the
indoor unit and wall, and tilt the
indoor unit for better operation.
The auxiliary piping can be connected
to the left, rear left, rear right, right,
bottom right or bottom left.
Right
Rear right
Bottom Rear
right left
Bottom left
Do not allow the drain hose to get
slack.
Cut the piping
hole sloped
slightly.
Make sure to run the drain hose
sloped downward.
Insulate the refrigerant pipes
separately with insulation, not together.
6 mm thick heat resisting
polyethylene foam
Left