Set Up Your Device; Initial Setup - Samsung Convoy 4 User Manual

Set Up Your Device

Turning the Phone On or Of
1. Open the phone.
2. Press and hold the
power-on screen displays.
Note: Do not turn on the phone when mobile phone use
is prohibited.
3. If the phone requests a password, enter it and
press OK or the
information, see "Security" on page
The Home screen displays while the phone
searches for your network. After the phone inds
your network and displays adequate signal strength
bars, you can make or receive calls.
Note: The display language is preset to Automatic
at the factory. To change the language, use
the Language menu. For more information, see
"Language" on page
4. When you want to switch of the phone, press and
hold the Power key until the power-of image
displays.
Getting Started
Power key until the phone
Center key. For more
130.
128.
FOR INTERNAL USE ONLY

Initial Setup

The irst time you turn on your phone, Set-up Wizard
will prompt you to conigure basic preferences, to
quickly get started using your phone.
You can also access Set-up Wizard at any time in
Settings.
From the Home screen, press
Set-up Wizard.
Use the Left Soft key (Preview),
key (Skip), and
to follow the prompts and set preferences:
• Font Style: Choose a font style for the dial,
menus, and messaging.
•
Font Size: Choose a font size for the dial,
menus, and messaging.
•
Volume Key Control: When enabled, you can
adjust the display's font size by pressing the
Volume Key.
DRAFT
12
MENU > Settings >
Right Soft
Center Select key (NEXT) or (SET)
Set Up Your Device