Get Going; Installing In Your Car; Positioning The Device; Switching On And Off - TomTom GO Camper User Manual

Get going

Installing in your car

Use the supplied mount to install your TomTom GO Camper in your vehicle. Read the instructions
about positioning your device
To install your TomTom GO Camper, do the following:
1. Connect the supplied USB cable to the mount. If the mount is integrated into your TomTom GO
Camper, connect the USB cable to the device.
Note: Use ONLY the USB cable supplied with your TomTom GO Camper. Other USB cables may
not work.
2. Connect the USB cable to the USB car charger and plug this into the power supply on your
dashboard.
3. Choose the best smooth location, on your windscreen or side window, to mount your TomTom
GO Camper.
Tip: If the mount is integrated into your TomTom GO Camper, you can easily change the
rotation of your device. Push the button on the back of the device to release the mount, then
slide the mount out. Insert it back into the other side of the device.
4. Make sure that both the suction cup on the mount and your windscreen are clean and dry.
5. Press the suction cup of the mount firmly against your windscreen.
6. Turn the rubber grip near the base of the mount in a clockwise direction until you feel it lock.
7. If your mount is not integrated into your TomTom GO Camper, place your TomTom GO Camper
in the mount, making sure that it clicks into place.
Dashboard adhesive disks are available as part of a range of accessories for your TomTom GO
Camper. For more information, go to tomtom.com/accessories.

Positioning the device

Be careful where you install your TomTom GO Camper. The TomTom GO Camper shouldn't block or
interfere with any of the following:
Your view of the road.

 The controls in your vehicle.
Your rear-view mirrors.

The airbags.

You should be able to reach your TomTom GO Camper easily without leaning or stretching. In a car,
you can attach your TomTom GO Camper to the windscreen or side window or you can use a
Dashboard Mount Disk to attach the mount to your dashboard.

Switching on and off

Switching your device on
Press the On/Off button until your device starts. If the device was off you see the map view. If your
device was sleeping you see the last screen you were looking at.
before you install your TomTom GO Camper.
11