Download Print this page
Sony XPERIA XZ2 SOV37 Basic Manual
Sony XPERIA XZ2 SOV37 Basic Manual

Sony XPERIA XZ2 SOV37 Basic Manual

Advertisement

Quick Links

Preface
Thank you for buying "Xperia XZ2" (simply called "the product" or
"main unit" from here on).
Before using the product, read "Basic Manual" (this manual) and
"Setting Guide" for proper handling.
Packaged items
SOV37
Before your start using the product, make sure that you have all
the following packaged items with the product.
Basic Manual
• Xperia XZ2
■ Online Manual (Japanese)
Check "Online Manual" (Japanese) which describes detail
explanations on various functions on the product from the
following procedure.
From the Home screen, [
][お客さまサポート (Customer
support)][取扱説明書 (Online Manual)] (Japanese)
The following items are not included in the package.
• microSD memory card
• AC adapter
• Earphones
Also, you can check "Online Manual" (Japanese) on the au
homepage.
https://www.au.com/online-manual/sov37/
In this manual, the contents on Android 8.0 are provided.
au IC card
2
Pull out the tray straight from the main unit to remove
Your phone number etc. is recorded
au Nano IC Card 04
in au IC card.
IC (metal) part
The product is compatible with au
Nano IC Card 04.
Front
Back
Tray
Attaching/removing au IC card
Before attaching/removing au IC card, make sure to turn off the
3
Set au IC card into the tray with the IC (metal) part
product.
facing up
Pay attention to the orientation of notch.
■ Attaching au IC card
Surely set au IC card into the tray not to come off.
1
Put your fingertip (nail) into the groove of the microSD
memory card/au IC card slot and draw the cover in the
Notch
direction of arrow
Groove
Cover
g
■ Force-quitting
Turning the power on
1
Press and hold Power key and the upper part of the
volume key at the same time for approximately eight
seconds, and release your fingers after the product
Turning the power on
vibrates three times consecutively
1
Press and hold Power key (over 1 sec.)
The product vibrates and after a while, the lock screen
appears.
When "ようこそ (Welcome)" appears after the product is
powered on, follow the onscreen instructions to set the
initial settings.
For details on the initial settings, refer to "Setting Guide".
2
Swipe (flick) the screen up
The Home screen appears.
■ Turning the power off
1
Press and hold Power key (over 1 sec.)
2
[Power off]
Locking the screen
❖Information
Turn off the backlight of the screen to set sleep mode to prevent
• To restart the product in safe mode (start with almost default
the touch panel or key from operating mistakenly or lock the
state), press and hold Power key (over 1 sec.)Long-touch
screen.
"Power off".
1
While the screen is displayed, press Power key
■ Unlocking screen lock
The lock screen appears when turning the power on or the
screen backlight is canceled by pressing Power key.
1
On the lock screen, swipe (flick) the screen up
n
❖Information
• Purchase a specified charger (sold separately).
• The battery is built into the product.
• Illustrations used in this manual are just images for explanations.
They may be different from actual ones.
About Operating Instructions
■ "Setting Guide"/"Basic Manual" (this manual)
Handles only basic operations for main features.
■ Online Manual (Japanese)
• USB Type-C
-3.5φ conversion/
Check "Online Manual" (Japanese) which describes detail
TV Antenna cable 01(03SOHSA)
explanations on various functions on the product from the
following procedure.
From the Home screen, [
][お客さまサポート (Customer
support)][取扱説明書 (Online Manual)] (Japanese)
• 取扱説明書 (Basic Manual)
(Japanese)
• ご利用にあたっての注意事項
(Cautions on using the
Also, you can check "Online Manual" (Japanese) on the au
product) (Japanese)
• 設定ガイド (Setting Guide)
homepage.
(Japanese)
https://www.au.com/online-manual/sov37/
■ "取扱説明書 (Full Instruction Manual)"
• Desktop holder
(Japanese)
• USB Type-C
cable
For detailed descriptions on various functions, refer to the "取扱説
明書(詳細版) (Full Instruction Manual)" (Japanese) available on
the au homepage.
https://www.au.com/support/service/mobile/guide/manual/
a
4
Keep the product horizontal, insert the tray with the
card into the main unit, and then push it straight
Pay attention to the orientation of the main unit and the tray.
Tray
5
Firmly press the tray to the end and check that there is
no gap between the main unit and the cover
IC (metal) part
■ Removing au IC card
1
Put your fingertip (nail) into the groove of the microSD
memory card/au IC card slot and pull out the cover
2
Pull out the tray straight from the main unit to remove
3
Remove au IC card from the tray, insert and push the
Tray
tray straight into the main unit
Cover
Pay attention to the orientation of the tray and the main unit.
4
Firmly press the tray to the end and check that there is
no gap between the main unit and the cover
❖Information
• Note the following points, otherwise handling au IC card
may cause malfunction or damage.
• Do not touch the IC (metal) part of au IC card.
• Insert in the correct direction.
• Do not use force to attach or remove.
h
❖Information
• In the lock screen, swipe (flick) "
" or "
" to use Google
Assistant or Camera.
Basic Operation
Key icons
The operations for
,
,
at the bottom of screen are as
follows.
Return to the previous screen. Close the
Back
menu or the Notification panel.
Display the Home screen. Long-touch to
Home
activate Google Assistant.
Display recently used apps in a thumbnail list
Task/History
where you can activate or exit an app.
Also, the split screen is available.
❖Information
• Swipe (flick) the key icon display area left or right to use
One-handed mode. With One-handed mode
o
■ For Those Requiring an English Instruction
• In this manual, "microSD
available)", "microSDHC
Manual
available)" and "microSDXC
You can download the English version of the instruction manual
available)" are abbreviated as "microSD memory card".
from the au homepage.
• All of the indicated amounts exclude tax unless otherwise
Download URL:
specified.
https://www.au.com/english/support/manual/
• Company names and product names referred to in this
manual are trademarks or registered trademarks of
Regarding notations used in this document
respective companies. The TM and ® marks may be
omitted in this manual.
• In this manual, keys (key icons) are represented by
• "The Company" as appears in the manual refers to the
simplified illustrations such as
,
,
. Please be
following companies:
forewarned.
Sold by: KDDI CORPORATION, OKINAWA CELLULAR
• In this manual, operations of tapping menu items/icons/
TELEPHONE COMPANY
buttons on the screen etc. are indicated as [(name of the
Manufactured by: Sony Mobile Communications Inc.
item etc.)].
• In this manual, screens and operations for the product with
au Nano IC Card 04 attached are described.
• Screen illustrations shown in this manual may look different
from the actual screens. In some cases, minor details or a
part of a screen may be omitted.
• In this manual, "Basic Manual" (this manual), "Cautions on
using the product", "Setting Guide" and "取扱説明書(詳細
版) (Full instruction manual)" (Japanese) are collectively
referred to as "Instruction Manual".
• In this manual, explanations for the theme "Black" are
provided.
• In this manual, operations in portrait view are described as a
standard. In horizontal view, menu items, icons, buttons on
the screen, etc. may differ.
• In this manual, "au Nano IC Card 04" is abbreviated as "au
IC card".
b
c
• The error message appears when au IC card is not set
4
Keep the product horizontal, insert the tray with the
properly or there is a malfunction in au IC card.
card into the main unit, and then push it straight
• Do not lose au IC card after removed.
Pay attention to the orientation of the main unit and the tray.
• Do not insert au IC card with conversion adapter attached.
Doing so may cause a malfunction.
Attaching/Removing a microSD memory card
Before attaching/removing microSD memory card, make sure to
turn off the product.
■ Attaching a microSD memory card
1
Put your fingertip (nail) into the groove of the microSD
memory card/au IC card slot and pull out the cover
5
Firmly press the tray to the end and check that there is
2
Pull out the tray straight from the main unit to remove
no gap between the main unit and the cover
3
Set a microSD memory card into the tray with the
❖Information
terminal side facing up
• Do not touch the terminal of the microSD memory card.
Surely set a microSD memory card into the tray not to come
• Insert a microSD memory card in the appropriate direction.
off.
Inserting forcedly could result in removal failure or may
Terminals of microSD memory card
cause damage the card.
■ Removing a microSD memory card
1
Put your fingertip (nail) into the groove of the microSD
memory card/au IC card slot and pull out the cover
2
Pull out the tray straight from the main unit to remove
Tray
3
Cover
Remove the microSD card from the tray, keep the the
product horizontal, insert and push the tray straight
into the main unit
Pay attention to the orientation of the tray and the main unit.
4
Firmly press the tray to the end and check that there is
no gap between the main unit and the cover
i
j
Using the touch panel
The display of the product is a touch panel operated by touching
it with your finger.
■ Tap/Double-tap
Tap: Gently touch the screen and then immediately release your
finger. Double-tap: Touch the same position twice.
Tap/
■ Long-touch
Double-tap
Keep touching an item with your finger.
■ Slide
While your finger is gently touching the screen, trace it to the
desired direction to move over.
■ Swipe (flick)
Operate the screen by quickly moving (flicking) your finger up/
down/left/right.
Swipe
■ Pinch
(Flick)
Touch the screen with two fingers and widen (pinch-out) or
narrow (pinch-in) the fingers' distance.
Displaying the menu
■ Drag
There are two types for displaying the screen menu; tapping the
Keep touching an item or icon, trace it to the desired direction to
move.
menu icon (
• Depending on application/function, color or shape of menu
icon, or menu display may differ.
p
q
memory card (commercially
memory card (commercially
Getting Ready
memory card (commercially
Names and functions of parts
a microSD memory card/
a
au IC card slot
*1
b Second microphone
:
c d
Reduces noise so that
an opposite party can
easily hear your voice.
c Notification LED
(uP.24)
d Proximity/Light sensor:
Switches touch panel
on and off to prevent
from erroneous
operation during a call/
Auto-control for display
brightness.
e Earpiece/Speaker
f Front camera
g Display (Touch panel)
h Speaker
i Mouthpiece/
i j
Microphone
j USB Type-C connection
terminal
k Volume key/Zoom key
l Power key/Screen lock key
m Camera key
d
Charging
When you purchase your product, the internal battery is not fully
charged. Charge the battery before use.
❖Information
• When charging starts, the Notification LED of the product
lights according to the battery level. To check the battery
level, see the status bar in the top of the screen, or from the
Home screen, [
][Settings][System][About phone]
[Status] and see "Battery level".
Tray
• If you start charging with the product turned off, a screen
indicating the charging status launches but operations are
not available. Thus, do not charge the product in a place
where the use is prohibited.
• The charging time may take longer when charging with a PC
or while using the camera function.
• To watch the TV while charging, use the Wireless Charging
Pad compatible with Qi (sold separately).
■ Charging with the AC Adapter
Charging with connecting TypeC Common AC Adapter 02 (sold
separately) is explained.
1
Insert the power plug of TypeC Common AC Adapter 02
(sold separately) into an outlet
2
Insert the USB Type-C plug of TypeC Common AC
Adapter 02 (sold separately) into the USB Type-C
connection terminal of the product straight
When charging is started with the product powered on, the
start sound for charging sounds and the Notification LED of
the product lights.
k
Home screen
Home screen consists of multiple pages. Tap "
Home screen anytime.
a Google Search
b Widgets
a
c Shortcuts (Apps)
b
Long-touch it to display the
Long-touch
Slide
shortcut menu. You can perform
the specified operation or check
the app information. When
is
displayed, tap it to add an
operation shortcut to the Home
screen.
c
d Current position
d
Indicates the number of pages
e
of the Home screen and current
Pinch
Drag
position. Swipe (flick) the Home
screen left or right to switch
pages.
e Dock
Shortcuts (apps) or folder can be located. They are always
displayed even when the page of the Home screen is
switched.
or
), and long touching the input field or item.
f Wallpapers
g Folders (Google, 基本機能 (Basic functions))
Several shortcuts (apps) are stored.
h Apps key
Tap to display the Apps screen.
r
n Built-in antenna
*2
n o
p
o RGBC-IR sensor:
v
q
Detects element of lighting
source of shooting
r
w
environment to adjust white
s
x
balance automatically when
t
n
shooting.
b
p Nameplate
*3
u
y
q GPS/Built-in antenna
*2
e
f
r Flash/Photo light
z
s Laser AF sensor:
Detects distance from an
object when shooting to focus
A
k
the camera on automatically.
t Camera lens
®
*2
u Wi-Fi
antenna
n
v Wi-Fi
®
®
*2
/Bluetooth
antenna
g
w au IC card
l
x
mark
y Fingerprint sensor
z Wireless charging touch point
A Back cover
*4
m
*1 Do not jab with a sharp object such as a needle. Doing so may
cause a malfunction.
h
*2 The antenna is built in. Covering around the antenna by your
hand may affect the quality of call/communication.
*3 A sticker with CE mark, FCC ID, IMEI information, etc. printed is
attached. Do not remove the sticker or nameplate.
*4 The back cover is not removable. Removing forcibly might
cause damage or a malfunction. Also, battery is built into the
main unit and not removable by customers.
e
f
Notification LED
100V AC
TypeC Common
outlet
AC Adapter 02
(sold separately)
USB Type-C
connection terminal
USB Type-C
plug
3
When charging is complete, remove the USB Type-C
plug of TypeC Common AC Adapter 02 (sold separately)
from the product
4
Remove the power plug of TypeC Common AC Adapter
02 (sold separately) from the outlet
TV antenna
To watch the TV, connect USB Type-C
-3.5φ conversion/TV
Antenna cable 01.
1
Insert the USB Type-C plug of USB Type-C
-3.5φ
conversion/TV Antenna cable 01 to the USB Type-C
connection terminal of the product
l
m
❖Information
• When an app has notification, a dot or number may appear
" to return to the
on the shortcut (app) or folder.
Using the Apps screen
In the Apps screen, apps which are installed to the product are
displayed. Tap the icon to activate the app.
• You may incur communication charges depending on the
function.
f
■ Starting an app
1
From the Home screen, [
]
When there are several pages in Apps screen, swipe (flick)
g
left or right to switch the pages.
2
Tap an app icon to use
e
Some apps are stored in a folder.
h
■ Main apps
Phone
Play Store
Contacts
Camera
au-mail
Album
Maps
+メッセージ(SMS)
(PlusMessage (SMS))
Google
Chrome
Gmail
Settings
取扱説明書 (Online
Manual) (Japanese)
Calendar
s
t

Advertisement

loading

Summary of Contents for Sony XPERIA XZ2 SOV37

  • Page 1 (uP.24) buttons on the screen etc. are indicated as [(name of the following procedure. d Proximity/Light sensor: t Camera lens Manufactured by: Sony Mobile Communications Inc. item etc.)]. ® From the Home screen, [ ][お客さまサポート (Customer u Wi-Fi...
  • Page 2 RAM: Approx. 4GB In case above numbers are not available (toll free) contact Repair and Delivery Support Center. maximum connection • Sony Mobile Desktop Holder 02 (02SOPUA) (sold location where the product is used, and the function 0120-925-314 Camera pixels Camera: Effective pixels Approx.