Table of Contents
Advertisement
System Requirements Macintosh
The following table lists the minimum and high volume recommended system setup to run RIP Software.
System requirements vary according to the size of the files to be printed, the output device used, and other
variables. Your particular setup and intended use of the software determine what hardware and software
setup you need to get the most out of RIP Software. If you are working with relatively small files, the minimum
setup may be sufficient. Similarly, if you are working with large files, you should consider the recommended
setup. Consult your dealer for advice when choosing a system.
Processor
RAM
Install Space
Working Disk
Space
Operating System
Video
Others
Paralel Output
USB Output
Network Output (*)
(*)Only when printers with network capability are used.
Minimum
Power PC 166
128 MB RAM with at least 196 MB of
virtual memory enabled
200MB
2GB or more
Mac OS 8.1 – 9x with Appearance
Manager and ColorSync installed
800 x 600 screen resolution with 16 bit
colors
4x CD-ROM Drive
MAC/PCI Card
USB-PIA (requires Mac OS 8.5 or later)
10 BASE-T
Recommended
G3 or G4 300 MHz or faster
256 MB RAM with at least 257 MB of
virtual memory enabled
200MB
4GB or more for storage
Mac OS 8.1 – 9.x with Appearance
Manager and ColorSync installed
1024 x 768 screen resolution with 16 bit
colors
16x CD-ROM Drive
MAC/PCI Card
USB-PIA (requires Mac OS 8.5 or later)
100 BASE-TX
6
Advertisement
Table of Contents
