Roland RS-50 Owner's Manual page 21

fig.q04-02
1
1.
Press [PATCH] so it is lit and you are in Patch mode.
2.
Use [0]–[9] to specify the category group of the patch you want to select.
3.
Use VALUE [-]/[+] to select sounds within the category group.
Selecting sounds by category
In Patch mode, the direct access buttons [0]–[9] act as category select buttons.
Since the patches you select for [0]–[9] (each category) will be remembered even
when the power is turned off, you can select ten favorite patches from the panel and
recall those patches instantly just by pressing [0]–[9].
2
Try out the sounds
3
The rhythm sets are
included in [0] (p. 22).
You can turn [NUMERIC]
on and use the [0]–[9]
numeric keys to input a
patch number directly.
Press [ENTER] to finalize
the number (p. 43).
Patch list (p. 111)
21