Connection Example - Roland RT-10K Owner's Manual

Drum Triggers-Definition
A drum trigger uses a built-in sensor to sense the timing and velocity (force) of how the drum is
played. Then these trigger signals and transmitted to the sound module.
Vibration Trigger Signal
The RT-10K Kick Trigger and RT-10T tom trigger support head triggering.
The RT-10S Snare Trigger supports separate head/rim dual triggering.
Setting Up
1.
Mount the drum trigger (p. 6).
2.
Then connect it to percussion sound module (p. 8).
3.
Set the trigger type and various parameters in the percussion sound module (p. 14).
4.
If needed, fine-tune the trigger parameters while checking the response of the trigger (p. 14).

Connection Example

fig.Setting
Percussion Sound Module
Trigger MIDI Converter
Audio
MIDI
Before You Start
5