Roland RT-10K Owner's Manual page 12

Troubleshooting
Sounds Are Triggered Without Playing the Drums
• Is the volume too loud of nearby monitor speakers?
• If in a band situation, is the bass amp too close or too loud?
No Sound When Playing Softly
• Adjust the "Threshold" value. (p. 9)
No Sound From the Rim
when Playing a Rim Shot or Just the Rim
Separate triggering from the rim is only possible when using the RT-10S snare trigger.
• Make sure the cable is Stereo.
• Verify that the trigger input you are using is rim-shot capable. (p. 14)
• Verify your trigger parameter settings in the module you are using. (p. 14)
Same Sound from the Rim and Head
• This is normal if you are not using the RT-10S snare trigger.
Dynamic Response Seems Strange
• Adjust the "Sensitivity" value. (p. 9)
12