Advertisement
Attaching the Divided Pickup
Adjust R on the pickup in accordance with
the guitar on which the pickup is being installed.
Use the included screws and springs
to attach the pickup on the guitar.
Dimensions
● GK Connector Board
28.0
32.0
● Connector Plate
45.0
37.0
22.2
C.L
Wirings
● For Guitar Signal ● For Guitar
Battery
1: WHITE
1: BLACK
2: SHIELD
2: WHITE
R Adjustment Screw
Unit : mm
● Preamp Board
4- 3.3
2
2- 3.2
C.L
16.3
● For GK Connector-A
1: RED
2–7: WHITE
1.The "Roland" logo and the cable should emerge from under sixth string.
2.Do not locate the Divided Pickup more than 20 mm from the bridge.
20.0 mm (Max.)
3.Position so each string passes over a pickup yoke.
Sixth
Fifth
string
string
* Compatible with guitars having a string spacing of 9.6–11.8 mm.
4.Adjust the pickup height and R so that the clearance between the each string
and pickup yoke is 1.0 mm when the string is pressed at the highest fret.
String
1.0 mm
(Max.)
Divided Pickup
● Divided Pickup
50.0
● For GK Connector-B
1: YELLOW
2–8: BLUE
Forth
string
102.3
95.1
(57.2)
* ...with yokes at maximum height
● For GK Volume
● For Switches
1: RED
2: WHITE
3: BLACK
03782690
3.6
37.9
10.8
2- 3.2
1: WHITE
2: SHIELD
3: ORANGE
4: YELLOW
5: GREEN
6: BLUE
7: PURPLE
8: GRAY
'04-10-1N
Advertisement
