Table of Contents
Advertisement
MAN0889_Issue 3_03/13
Appendix A - Handheld Interrogator
A.4 Basic User Tasks
Switching On
(1) Press
for two seconds.
The unit recalls its previously set operating mode, i.e. EXCEL, OPTIMA or OPTIMA PLUS, and displays
the following message for approximately three seconds:
The unit then displays the top level of the menu style interface in the following way:
During use the first line of the display shows the current level in the menu tree.
The second line displays the sub menu title, action to be invoked, or data value to be checked/changed.
Note:
To change the operating mode at switch-on, e.g. from OPTIMA to EXCEL, press the ESC key whilst
the initial message is displayed. This changes the mode and re-displays the message.
Switching Off
(1) Select the Power Off option from the Main Menu,
Alternatively press the
Notes:
1.
The unit powers down automatically after five minutes of non-use.
2.
The fast power off facility and auto power off are disabled when a menu option is selected that
modifies the interrogator's configuration.
Changing the Battery
To fit/replace the battery proceed as follows:
(1) Loosen the four rear cover screws.
Use a 2.5mm Allen hexagon key.
(2) Carefully lift the front half of the interrogator away from the rear cover.
Ensure that the flexible connector between the keypad and the electronics module is not damaged.
(3) Unclip and remove the battery.
(4) Fit the new battery, reuse the protective sleeve.
(5) Carefully refit the front half of the interrogator to the rear cover.
Ensure that the flexible connector lies flat.
(6) Tighten the four rear cover screws.
Z - SHC1 Excel
Interrogator 4V0
Main Display
and ESC buttons simultaneously for a fast power off.
55
Searchline Excel Cross-Duct Technical Handbook
v
Advertisement
Table of Contents
