Instrument Firmware Upgrades; Initiating Communications; Exploded View And Basic Parts List - Honeywell ToxiPro CO Reference Manual

5.2

Instrument firmware upgrades

The ToxiPro's instrument firmware may be upgraded at
any time with a PC through the instrument's IrDA port.
See section 5.3 for instructions on initiating
communications.
For the latest version of the instrument firmware see the
Honeywell Analytics download website at
http://www.honeywellanalytics.com
5.3

Initiating communications

To initiate communications, hold the MODE button as if
you are turning the instrument off. Once "OFF" or "on" is
shown, continue to hold MODE until the "IrdA" screen is
shown and the LED/IrDA port turns on.
Once "IrdA" is shown release the MODE button. Then
align the infrared port at the top front of the ToxiPro with
the PC's infrared port to proceed with the download.
The LED/IrDA port will blink during communication with
the PC. The ToxiPro should be located 1-2" (2.5-5cm)
from the IrDA Port.
Proper Positioning of IrDA Module
6. Exploded view and
basic parts list
21