Installation
2.1 Installing the driver
3. Decide whether the driver will be set up for the current user "Just me" or for all users
4. Click the "Next" button to install the driver.
5. Once the driver has been successfully installed, click the "Close" button to exit the setup
After successful installation of the driver the entry "3964R/Lauf" is created in the Control
Panel.
8
"Everyone".
Figure 2-2
Selection of the user group
program.
Figure 2-3
Installation successfully completed
SIMATIC 3964R protocol for Windows 9x/XP/7
Installation Manual, 01/2013, J31069-D0131-U001-A2-7218