Table of Contents
Advertisement
■ Setting the Reference Pitch to
440.0 Hz
1.
While holding down the [Variation] button and
[Heavy] button, press the "C 4" key on the
keyboard.
fig.7-08.e
While holding down two buttons...
The reference pitch will be set to 440.0 Hz. This is the
most commonly used setting. The A4 (Middle A) key
will sound at 440.0 Hz.
■ Setting the Reference Pitch to
442.0 Hz
1.
While holding down the [Variation] button and
[Heavy] button, press the "D 4" key on the
keyboard.
fig.7-09.e
While holding down two buttons...
The reference pitch will be set to 442.0 Hz. This setting is
often used for concert pianos. The A4 (Middle A) key
will sound at 442.0 Hz.
Changing the Volume
Balance in Dual Play
You can change the volume balance between the two layered
sounds in Dual Play (p. 16).
When the keyboard is turned on, the volume balance is set to
that the tone assigned to the left Tone button sounds louder
of the two selected tones.
This setting remains in effect until the keyboard's power is
turned off.
fig.5-04.e
The tone assigned
to the left Tone button
sounds louder
Press
C#4
Press
D#4
Press
The tone assigned
to the left Tone button
sounds quieter
While
Press
holding down...
Some Handy Functions
1.
While holding down the [Variation] button, press
\
the [Light] button.
The [Variation] button, [Light] button and the Tone
button for the currently selected value flash.
2.
Press any Tone button.
The pressed button's indicator blinks.
Tone
button
Of the two selected tones, the tone assigned to
Piano
the left Tone button sounds louder.
Of the two selected tones, the tone assigned to
E. Piano
the left Tone button sounds somewhat louder.
Harpsi-
The two selected tones are played at the same
chord
volume.
Of the two selected tones, the tone assigned to
Organ
the left Tone button sounds somewhat quieter.
Of the two selected tones, the tone assigned to
Strings
the left Tone button sounds quieter.
3.
Press the [Light] button or the [Variation] button.
The button's indicator returns to its previous state.
Changing the Depth of the
Reverb Effect
The depth of the reverb effect (p. 17) can be adjusted.
There are five levels of depth from which to choose.
This is set to "3" when the power is turned on.
fig.7-15.e
1
2
3
While holding
down...
Press
1.
Holding down the [Reverb] button, press any
Tone button.
■ Checking the depth of the
Reverb Effect
1.
Press and hold the [Reverb] button.
The Tone button indicators will blink to indicate the
selected depth.
Description
More strongly
reverb
4
5
21
Advertisement
Table of Contents
