DP1200/1500
[8] DISASSEMBLY AND ASSEMBLY
Before disassembly, be sure to disconnect the power cord for safety.
The disassembly and assembly procedures are described for the fol-
lowing sections:
1. High voltage section
2. Operation panel section
3. Optical section
4. Fusing section
5. Tray paper feed/transport section
6. Manual paper feed section
7. Rear frame section
8. Power section
9. SPF section
10. 2nd cassette section
11. DUP motor section
12. Reverse roller section
13. FAX MCU PWB section
14. FAX-SPF section
1. High voltage section
A. List
No.
Part name Ref.
1
Drum
2
Transfer charger unit
3
Charger wire
B. Drum replacement
1) Remove the drum cover. (4 Lock Tabs)
2) Remove the drum fixing plate and the photoconductor drum.
(Note) Dispose the drum fixing plate which was removed.
C
(2)
3) Check the cleaning blade and the red felt for no damage.
•
If there is any damage, execute all procedures from item 5) and
later.
•
If there is no damage, execute the procedure of item 12).
4) Remove the main charger.
(Cleaning the screen grid and the sawteeth.)
8 – 1
(3)