Changing The Metronome Volume - Roland DP-900 Owner's Manual

Playing the Keyboard
Changing the beat of metronome
3.
Press the [Beat] button.
The currently selected beat will be displayed.
4.
Press the [+] or [-] button.
If you press the [+] or [-] button, the beat will change.
If you press the [+] and [-] buttons simultaneously, the beat will go back to
what it was before you changed it.
fig.disp-beat
Display
2.2
0.4
2.4
3.4
4.4
5.4
Stopping the metronome
5.
Once again press the [Metronome] button, getting its indicator
to go dark.
The metronome will stop.

■ Changing the Metronome Volume

The volume of the metronome can be adjusted, with eight volume levels
available.
1.
Hold down the [Metronome] button and press the [+] or [-]
button.
The currently specified volume will be displayed.
Continue to hold down the [Metronome] button, and press the [+] or [-]
button to sound the metronome, and change the volume.
fig.disp-metrovol
20
beat Display
2/2 6.4
Only weak beats 7.4
2/4 3.8
3/4 6.8
4/4 9.8
5/4 12.8
It is not possible to change
the beat during song
playback or recording.
beat
6/4
7/4
Correspondence between
3/8
6/8
beat and tempo display
9/8
12/8
Beat
2/2
x/4
x /8
This is set to "4" when the
instrument is turned on.
When you hold down the
[Metronome] button, the
currently specified
metronome volume will be
displayed.
Tempo Value
=10–125
=20–250
=40–500