Rockford Fosgate 360.6 Operation & Installation page 9

8. Input Sensitivity Controls – The input level controls are preset
to match the output of most source units. They can be adjusted
to match output levels from a variety of source units.
9. Bass EQ Control – The Bass EQ allows a narrow band adjustment
of up to +18dB centered at 45Hz. The bass boost can be
bypassed by turning the control to its minimum or counterclock-
wise position. The Bass EQ is dedicated for "Channel C" only.
10. Internal Crossovers – These built-in crossover cards are
configurable for a multitude of operating frequencies. The
orientation of the card in its socket determines the function of
high-pass, low-pass, or full range operation.
11. Channel C Phase Switch – This switch enables you to easily
invert the phase of "Channel C" (0 /180 ) without having to
disconnect the speaker wires.
12. LED Power Indicator – The LED illuminates when the unit is
turned on.
*Please refer to Owner's
Manual for signal input
switch configurations.
*Signal
Phase
Switches
Switch
–180 0
11
10
–180 0
Ch. C Ch. B
XCard Dual Filter
XCards
– 6 –
Input
7
Ch. A
XCards