RocketFish RF-WHD200 User Manual page 11

Connect the display device, such as a TV or projector, to the receiver with
2
a high-speed HDMI cable.
HDMI cable
Connect the AC power adapters to the transmitter and receiver and to
3
power outlets.
Note: The included AC adapters are labeled "Receiver" and "Transmitter," to ensure
that the correct adapter is used for each device.
Power on your TV or projector and switch to the HDMI input that the
4
WirelessHD receiver is connected to.
Power on at least one source component that is connected to the
5
WirelessHD transmitter.
Receiver
Display devices
OR
RF-WHD200 11