Hobart 1612 Assembly Instructions

Use this kit for any of the following Hobart slicer models: 1612, 1612P, 1612E, 1712, 1712E, 1712R,
1712RE, 1812, 1812PS, 1812RS, 1912, 1912R, 2612, 2612C, 2712, 2712C, 2812, 2812C, 2812PS,
2912, 2912B, 2912C, 2912PS, 2912SC.
PART NO.
873604
F-33999
ASSEMBLY
Slicers with Front Meat Grip
WARNING: TURN SLICER OFF BEFORE ASSEMBLING FOOD CHUTE.
1. Position the Food Chute so the hangers fit around the Front Meat Grip Slide Rod (Figs. 1, 2). Rotate
Food Chute Hangers around the Slide Rod, lowering the Food Chute onto the Carriage Tray.
The Pusher Plate is used to push food down inside the Food Chute during slicing.
FOOD CHUTE
HANGERS
MODEL 1712E
Slicers with Rear Meat Grip
WARNING: TURN SLICER OFF BEFORE ASSEMBLING
FOOD CHUTE.
For models 2612, 2612C, 2712, 2712C, 2812, 2812C,
2812PS, 2912, 2912B, 2912C, 2912PS, 2912SC when
equipped with accessory Rear Meat Grip only.
Assemble the Food Chute to the Slide Rod in the front
Slide Rod location, as shown (Fig. 3).
ASSEMBLY INSTRUCTIONS
FOOD CHUTE — KIT NO. 873604
NAME OF PART
Food Chute Kit (complete) .....................................................1
Chute & Hangers ........................................................................1
Pusher Plate & Handle ...............................................................1
Assembly Instructions ................................................................1
FRONT MEAT GRIP
FRONT MEAT GRIP
SLIDE ROD
PL-41103-1
Fig. 1
TROY, OHIO 45374-0001
FOOD CHUTE
HANGERS
MODEL 2612
FOOD CHUTE
HANGERS
MODEL 2612
701 S. RIDGE AVENUE
AMT.
FRONT MEAT GRIP
SLIDE ROD
FRONT MEAT GRIP
PL-41104-1
Fig. 2
REAR MEAT GRIP
SLIDE ROD
IN FRONT POSITION
REAR HEAVY
MEAT GRIP
Fig. 3
FORM 33999 Rev. A (06-06)
PL-41105-1