Advertisement
Place a container under the steam wand then turn the control
2
dial to the " " position.
When water dispensing stops, the "
3
to the " " position. The machine is now in warm-up mode and the " " light will
fl ash slowly.
Once heated, a 1-minute rinse/self-cleaning cycle with fresh water will begin
4
automatically. Place a container under dispensing spout to catch water.
Before using the machine for the first time a manual rinse
5
cycle must be initialized. Place a container under the steam
wand then turn the control dial to the " " position. The
" " light fl ashes slowly and water will start to dispense.
Dispense all water until the " " light is illuminated and then
refi ll the water tank.
OPTIMIZE YOUR COFFEE
To optimize the extraction of coffee to the compactness of the ground coffee, brew
3-5 cups of espresso BEFORE drinking.
Fill the water tank again up to the MAX level indicator.
1
Place a cup under the dispensing spout. Make sure the control dial is set to the
2
position then press the
" "
"
Repeat Step 2 three-five times.
3
Your machine is now ready to brew coffee!
4
BREWING AN ESPRESSO USING WHOLE BEANS
Place an espresso cup under the dispensing spout.
1
Press the
"
2
421944059051_HD8645_47_QSG.indd 2
" light flashes slowly. Turn the control dial
button to grind and dispense espresso.
"
button to start brewing.
"
BREWING TWO ESPRESSOS USING WHOLE BEANS
Place two espresso cups under the dispensing spout.
1
To brew two espressos press the
2
consecutively and the machine will begin brewing.
NOTE: Brewing two espressos requires two grinding and
brewing cycles, automatically carried out by the machine.
HOW TO FROTH MILK USING THE STEAM WAND
Fill a frothing pitcher 1/3 of the way with cold milk.
1
Immerse the steam wand into the milk. Turn the control
2
dial to the
"
"
NOTE: Steam will begin dispensing when the machine
reaches the optimum temperature.
Froth the milk by gently swirling the container and moving it up and
3
down. When the milk froth has reached your desired consistency,
turn the control dial back to the
" "
and end the process.
After each use, clean the steam wand as described in the user manual.
4
button twice
"
"
position.
position to stop steam dispensing
9/3/2015 7:42:14 PM
Advertisement
