Function Setting; Function Selection Mode; Table Of Default Settings - SMC Networks ISA3-G series Operation Manual

Function Setting

■

Function selection mode

In measurement mode, press the
Select to display the function to be changed, [F
Press the button for 2 seconds or longer in function selection mode to return to measurement mode.
＜Operation＞
■

Table of default settings

Refer to the table below for the default settings.
Function number
Units selection 
F 0 (Unit)
F 1 (oUt1) OUT1 setting
F 2 (oUt2) (Not available)
F 6 ( FSt) Display value compensation
F10 ( SUb) Sub screen
F80 ( dSP) Display OFF mode
F81 ( Pin) Security code
F90 ( ALL) Setting of all functions
F98 (tESt) Forced output
F99 ( ini) Reset to default settings
: This setting is only available for models with the units selection function.
button for 2 seconds or longer to display [F 0].
].
Function name
Switch point
Hysteresis
Display colour
-46-
Default setting
[ PA] kPa
ISA3-F: [ 20]
ISA3-G: [ 50]
ISA3-H: [ 50]
ISA3-F: [ 3]
ISA3-G: [ 20]
ISA3-H: [ 20]
[ SoG] Green when ON,
Orange when OFF
[. - - -]
[ 0.0] Compensated value: 0.0
[. LEvEL] Level meter
[ on] Normal operation mode
[ oFF] Security code is not set
[ oFF] Not set all items
[normAL] Normal output
[ oFF] Not return to default settings
4 How to use
Page
Page 47
Page 48
Page 50
Page 51
Page 52
Page 53
Page 54
Page 55
Page 56
Page 57
No.PS※※-OMR0002-G