Wiring - SMC Networks ISA3-G series Operation Manual

■

Wiring

○
Mounting and removal of connector
Tighten the connector by hand.
Align the body connector key and the cable connector key groove to insert vertically.
Turn the knurled part of the cable side connector clockwise.
Connection is complete when the knurled part is fully tightened. Check that the connection is not loose.
○
Connector pin No. (Body side)
Connector pin No. Description
1 DC(+)
2
3 DC(-)
4 OUT1
-34-
N.C.
3 Installation
No.PS※※-OMR0002-G