Setting The Record Mode; Setting The Sensitivity Level - Radio Shack TCR-200 Owner's Manual

43-473.fm Page 9 Friday, August 13, 1999 9:21 AM
2. Press . Both
RECORD
lock down. When
PLAY
pressed down, every call made or
received is recorded.
Notes:
• If you set
REC MODE
when both parties are silent for
about 5 seconds, the recorder
stops recording until someone
starts speaking again.
• The
VOLUME
affect the recording level.
• VU/LEVEL flashes during record-
ing.
• To temporarily stop recording,
press . To resume record-
PAUSE
ing, press
PAUSE
• If the tape reaches the end during
a recording,
releases
RECORD
stops.
3. To stop recording, press
.
EJECT
and
RECORD
is
RECORD
to ,
VOX
setting does not
again.
it automatically
and , and
PLAY
STOP/

Setting the Record Mode

When is set to
REC MODE
corder begins recording when it receives
sound through the microphone or phone
line, and stops recording when it does
not receive sound for about 5 seconds.
Set to
REC MODE NORM
tinuously until the tape reaches the end
or you press
STOP/EJECT

Setting the Sensitivity Level

When you set
REC MODE
must set the sensitivity level located on
the bottom of the recorder.
the most sensitive setting and requires
only a soft sound to begin recording.
(low) is the least sensitive setting and
requires a louder sound to begin record-
ing. If the tape does not stop after about
5 seconds of silence, set
(medium) or (low).
M L
, the re-
VOX
to record con-
.
to , you
VOX
(high) is
H
L
to
SENSITIVITY
9