Table of Contents
Advertisement
4.4.3
Network » IP Filter
The IP Filter setting allows the administrator of the camera to limit the users
within a certain range of IP addresses to access the camera. To disable this
feature, select the Disable option; otherwise, select the Accept option to
assign the range of IP addresses that are allowed to access the camera, or
select the Deny option to assign the range of IP addresses that are blocked
from accessing the camera.
• Disable
Select this option to disable the IP Filter function of the camera.
• Accept
IPv4
Assign a range of IP addresses that are allowed to access the camera by
entering the
Start IP address
finished, click
Add
assign multiple ranges for the camera.
IPv6
Enter the
IP Address
• Deny
IPv4
Assign a range of IP addresses that are blocked to access the camera by
entering the
Start IP address
finished, click
Add
multiple ranges for the camera.
IPv6
Enter an
IP Address
For example, when you enter 192.168.0.50/192.168.0.80 in
IP Address
of Accept > IPv4, the user whose IP address is located within
192.168.0.50–192.168.0.80 will be allowed to access the camera. On the
other hand, if you enter the IP range in
the users whose IP address falls within the range will NOT be allowed to
access the camera.
and
End IP address
to save the range setting. You can repeat the action to
that is allowed to access the camera.
and
End IP address
to save the range setting. Repeat this step to assign
that will not be allowed to access the camera.
33
options. When you are
options. When you are
Start/End IP Address
Start/End
as Deny > IPv4,
Advertisement
Table of Contents
