Table of Contents
Advertisement
HDD INSTALLATION
The user can install the HDD on the product. But, since there are many parts and elements inside the product
that can cause electric shock, troubles, faults on the product and etc. Further inappropriate HDD installation
may generate HDD detection problem or not operate properly, Therefore it is advised to have the initial HDD or
additional HDD installation work done by a well experienced engineer from the agent where the product was
purchased.
Note for adding HDD
•
Pay special attention to avoid incorrect cable connection or scratches on the cable.
(It may cause product failure or fire)
•
Be careful not to get injured by the sharp edge of the internal side of the product.
•
Be careful not to lose any of unscrewed pieces or parts. Incomplete fixing and assembling may cause oper-
ational failure or malfunction.
HDD installation procedure
1. Remove the cover by unscrewing 2 screws on the right side panel, 2 screws on the left side panel, and 5
screws on the rear panel.
12
Advertisement
Table of Contents
