Rear Panel - NETGEAR EX6200 Quick Start Manual

Hardware
Front Panel and Side Panel
Support
For information about using the extender in access point mode, see the Do More booklet that came in the package with your extender.
After installing your extender, locate the serial number on the label and use it to register your product at https://my.netgear.com. You must register your product
before you can use NETGEAR telephone support. We recommend registering your product through the NETGEAR website. For product updates and web support,
visit http://support.netgear.com.
You can get the user manual online at
official NETGEAR support resources.
For the current EU Declaration of Conformity, visit: http://support.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
NETGEAR, Inc. 350 East Plumeria Drive, San Jose, CA 95134 USA
NETGEAR INT LTD
Building 3 University Technology Centre
Curraheen Road Cork Ireland
2.4 GHz Link Rate LED
5 GHz Link Rate LED
Device to Extender LED
Ethernet ports
1–5 LEDs
USB LED
USB 3.0 port
http://downloadcenter.netgear.com
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc.
Any non-NETGEAR trademarks are used for reference purposes only.

Rear Panel

WPS button
Ethernet ports 1–5
Indicator LEDs
2.4 GHz Link
Rate LED
5 GHz Link Rate
LED
Device to
Extender LED
Ethernet ports
1–5 LEDs
USB LEDs
or through a link in the product's user interface. We recommend that you use only the
AC1200 WiFi Range Extender
Model EX6200
Quick Start Guide
5 dBi external
antennas
Reset button
Power connector
Power button
This LED indicates the 2.4 GHz WiFi connection
between the extender and the router.
Solid green. Best connection
Solid amber. Good connection
Solid red. Poor connection
Off. No connection
This LED indicates the 5 GHz WiFi connection
between the extender and the router.
Solid green. Best connection
Solid amber. Good connection
Solid red. Poor connection
Off. No connection
Solid green. The extender and device are
connected.
Solid green. The Ethernet port has detected an
Ethernet link with the extender.
Solid green. A USB device is connected to the
extender.
August 2016