Front Panel; Rear Panel - NETGEAR EX6200 AC1200 Installation Manual

Hardware

Front panel

Support
After installing your extender, locate the serial number on the label and use it to register your product at https://my.netgear.com. You must register your product
before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website.
For product updates and web support, visit http://support.netgear.com.
You can get the user manual online at
NETGEAR recommends that you use only the official NETGEAR support resources.
For the current EU Declaration of Conformity, visit: http://support.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United
States and/or other countries. Information is subject to change without notice. Other brand and product names are registered trademarks or trademarks of their
respective holders. © NETGEAR, Inc. All rights reserved.
NETGEAR, Inc. 350 East Plumeria Drive, San Jose, CA 95134 USA
2.4 GHz Link Rate LED
5 GHz Link Rate LED
Device to Extender LED
LAN LEDs
USB LED
USB 3.0 port
http://downloadcenter.netgear.com

Rear panel

WPS button
Indicator LEDs
2.4 GHz Link Rate LED
5 GHz Link Rate LED
Device to Extender LED
LAN LEDs
USB LED
or through a link in the product's user interface.
January 2014
EX6200 WiFi Range Extender
AC1200 High Power Dual Band Gigabit Ports
Installation Guide
5 dBi external antennas
Reset button Power input
Power button
LAN ports
Solid green. Best connection
Solid amber. Good connection
Solid red. Poor connection
Off. No connection
Solid green. Best connection
Solid amber. Good connection
Solid red. Poor connection
Off. No connection
Solid green. The extender and device are
connected.
Solid green. The LAN port has detected an
Ethernet link with the extender.
Solid green. A USB device is connected to
the extender.