Panasonic TGP-600 Quick Reference Manual

QUICK REFERENCE GUIDE
Panasonic TGP-600
Handset Functions
1
Ringer/Charge/Message Indicator
Light Pattern Meaning
Steady On Charging
Slow Flash New missed call or voicemail
Quick Flash Receiving a call
Fully charged or the handset is not
Off
connected to the charger
2
Headset Jack – headsets can be used with the unit.
Not all operations with the headset can be guaranteed.
3
Talk/Speakerphone Key – Used to make or answer
calls, or toggle between Receiver mode and Hands-
free mode during a conversation.
4
Navigator Key
Left Display incoming call log
Up
Adjust ringer volume
Right Open the phonebook
Down Display outgoing call log
Center Display menu
5
Hold/Msg Key – During talking, used to place a call on Hold.
In standby mode, used to retrieve a call on hold if there is
one, or used to access your voice mailbox if no call is on hold
6
Silent Mode – Used to turn Silent Mode on or off when
pressed for more than 2 seconds in standby mode
7
LINE Key – Used to confirm the line status or to seize a line
8
Receiver
9
Display
10
Soft Keys – A / B / C these keys are used to select the item
displayed on the bottom line of the display
11
Power/Cancel Key – Used to end calls, exit the phonebook or
Function mode. Press and hold this key to turn the handset
on or off
12
Xfer/Clr Key – Used to transfer a call to another party or to
clear digits or characters
13
FUNC Key – Pressing this key followed by a keypad number
(0- allows you to perform various common functions quickly
14
Microphone
15
Charge Contacts
16
Strap holes – Used to attach phone straps and similar items
17
Speaker
1234 Main St | Anycity, US 00000 | 215.555.1212 | www.corporatewebsite.com
Front
1
2
3
4
5
6
7
Back
8
9
10
11
12
13
14
15
16
17